中英文切换

Time of issue:2019-05-03 00:00:00

Products

All categories
Number of views:
1001

FG-type grid packing

Retail price
0.0
Market price
0.0
Number of views:
1001
Product serial number
Quantity
-
+
Stock:
0
1
产品描述
Parameters

1. Product Characteristics

FG honeycomb grid packing is a new type of regular packing developed by our company. The filler has the advantages of large processing capacity, low pressure drop, high mass transfer efficiency, easy processing, manufacturing, installation and maintenance, etc. Packing is regularly stacked in the tower at a certain angle. The upper and lower packing units are staggered 90 degrees each other in the tower body, forming a network structure. The liquid is redistributed and tends to be uniform after each tray of packing.

 

2. Product Specification and Model

Model Thickness Bulk density kg/m3 Voidage % Specific surface area m2/m3 Grid spacing mm
FG-60-I 2 300 96.4 36 60
FG-60-Ⅱ 2.5 370 94.5
FG-60-III 3 440 94.6
FG-80-I 2 210 97.5 25 80
FG-80-Ⅱ 2.5 260 96.9
FG-80-III 3 310 96.3
FG-100-I 2 180 97.9 21 100
FG-100-II 2.5 200 97.4
FG-100-III 3 240 96.9

Note: I - light plate; II - punching; III - burr.

Material: carbon steel, stainless steel, aluminum, titanium, etc. The bulk density of carbon steel is shown in the table.

 

3. Product Advantages

Large void fraction, up to 95%, not easy to plug.

The specific load of the tower is about 1.5 times that of the sieve tray tower, reaching 60-80 m3/m2.h.

The height of each theoretical plate of the tower is 1.5-2.0 M.

The production capacity of the original plate extraction column can be improved by more than 50% by using FG packing.

FG fillers with regular burrs on the surface can enhance clarification and separation and reduce phase entrainment.

 

4. Packing support distributor

FG-F honeycomb grid filler supporting redistributor is a component of the filler. It is made of corrugated plate structure with two layers and 90 degrees staggered. Its main function is to uniformly break and cut droplets and improve mass transfer efficiency.

 

5. Packing support

Packing support is the inner part of packed bed. The most commonly used packing support is grille. According to the size of tower diameter, it can be divided into two types: block structure and block structure. Its free section is equivalent to the free section of packing.

 

6. Typical applications

Desulfurization of gasoline

Solvent deasphalting

Refining of Lubricating Oil Sucrose Formaldehyde

Atmospheric and vacuum distillation tower

Catalytic gasoline fractionator

Gas quench tower

Replacement of Glitsch grid packing in scrubber

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Previous
Next
hotline

If you have any questions during the use of the product, you can call our after-sales service hotline at any time, or leave us a message.

CONTACT

Add:

No. 2 Development Road, Qidong City, Jiangsu Province

PRODUCTS

QR code

Mobile Websites

Copyright © 2019 Qidong Mixer Plant Co., Ltd.
苏ICP备05024396号  Power by:300.cn Nantong